Linksys EG24M Manual de usuario descargar pdf (Pagina 32)

10/100 Managed 24-Port GigaSwitch

BRIDGING

If you select Bridging from the Advanced Management screen, the following

Bridging Parameters screen will appear.

1. To change the aging time, highlight Aging Time <seconds> and press

Enter. The following prompt will ask you to enter a bridge aging period,

in seconds. Enter a new aging period and press the Enter key. Enter 0 for

no aging.

2. To change the flood limit for all ports, highlight Flood Limit for All ports

<pkt/s>, the following prompt will ask you to enter the flood limit,

in packets per second. Enter a a new flood limit and press the Enter key.

Enter 0 for no limit.

3. Press the Esc key until you return to the desired screen.

Linksys EtherFast

II Series

5. Type a packet count number from 1 to 999, or type 0 for an infinite packet

count. Press Enter.

6. Move to Size <mbytes> and press Enter. The Enter Packet Size screen

will appear.

7. Type the packet size, from 0 to 1500, then press Enter.

8. Move to Timeout <sec> and press Enter. The Enter Timeout screen will

appear.

9. Type a timeout value, from 0 to 999, and press Enter.

10. When you finish specifying the ping parameters, press Esc to start ping-

ing a remote IP address.

11. Press Esc again to return to the L3 IP Networking screen.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 45 46

Sin comentarios

Linksys EG24M Manual de usuario Pagina 32