Linksys RT042 Manual de usuario descargar pdf (Pagina 50)

Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter

Windows 98 or Me Instructions

10/100 4-Port VPN Router

Appendix C: Finding the MAC Address and IP Address for

Your Ethernet Adapter

This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC

address cloning feature of the Router. You can also find the IP address of your computer’s Ethernet adapter. This

IP address is used for the Router’s filtering, forwarding, and/or DMZ features. Follow the steps in this appendix to

find the adapter’s MAC or IP address in Windows 98, Me, 2000, or XP.

Windows 98 or Me Instructions

1. Click Start and Run. In the Open field, enter winipcfg. Then press the Enter key or the OK button.

2. When the IP Configuration screen appears, select the Ethernet adapter you have connected to the Router via a

CAT 5 Ethernet network cable.

3. Write down the Adapter Address as shown on your computer screen. This is the MAC address for your

Ethernet adapter and is shown as a series of numbers and letters.

The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.

The example shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show something

different.

Windows 2000 or XP Instructions

1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.

2. At the command prompt, enter ipconfig /all. Then press the Enter key.

Figure C-2: MAC Address/Adapter Address

Figure C-1: IP Configuration Screen

Note: The MAC address is also called the Adapter Address.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Sin comentarios

Linksys RT042 Manual de usuario Pagina 50