Linksys Etherfast Manual de usuario descargar pdf (Pagina 8)

EtherFast

Managed 24-Port with Dual Gigabit Switch

EtherFast

Series

Telnet Management

Telnet management is available after the Switch has been configured with a

valid IP address, subnet mask, and default gateway (for Layer 2 mode) via the

console interface. Use telnet from any computer attached to the network.

SNMP/RMON Management

SNMP/RMON management is available after the Switch has been configured

with a valid IP address, subnet mask, and default gateway (for Layer 2 mode)

via the console interface. Manage the Switch from any network computer

using network management software.

NNoottee::

The Switch’s configuration program only provides

access to basic configuration functions. To access the

full range of SNMP management functions, you must use

SNMP-based network management software.

4. When the following screen appears, make sure that the Switch’s serial port

settings are as follows:

BAUD RATE: 19200

DATA BITS: 8

PARITY: None

STOP BITS: 1

FLOW CONTROL: None

Click the OK button.

Web Management

Web management is available after the Switch has been configured with a

valid IP address, subnet mask, and default gateway (for Layer 2 mode) via the

console interface. Use a standard Web browser (Internet Explorer 4.0 or

above, or Netscape Navigator 4.0 or above is suggested) from any computer

attached to the network. The Switch has a default IP address of 192.168.1.254

and a default subnet address of 255.255.255.0.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 56 57

Sin comentarios

Linksys Etherfast Manual de usuario Pagina 8